Lightbox
After a while of thinking how to do it and I finished my first box of light, somewhat rudimentary, but I used to take pictures I like, which are the photographs macros.
The photographs were taken with my Sony DSC-H50 camera using the function f, and not bringing Macross function built-in camera. There are some that I liked a lot and they were quite acceptable, some less so, but a matter of practice to get better and find yourself in good objects which sacarles photos.
The materials we use are the following:
- 1 box of 40x30x60 cm approx.
- butter paper.
- white cardboard.
- 1 or 2 lamps.
The reassembly procedure is as follows:
- Cut three sides of the box leaving a 2 cm margin on each edge to easily attach then butter paper.
- Cut 3 pieces of butter paper cuts size of the boxes, taking care to leave two inches more per side to glue to the box.
- Glue the three pieces of butter paper to the box.
- Cut a piece of white cardboard the width of the box here that is that there be careful and try to make the width not less than the width of the box, because after the
remove the photos you notice the bottom of the box. - Insert the piece of cardboard without a bend in the bottom of the box.
- Place lamps on the sides which were cut from the box to illuminate the objects you will introduce it.
I leave you the first pictures I got on my light box. I welcome your comments.
Comments
One Comment on Light box
-
Bitacoras.com on September 27, 2009 17:36
Bitacoras.com Information ...
Rate in Bitacoras.com: After a while of thinking how to do it and I finished my first box of light, somewhat rudimentary, but I used to take pictures I like, which are the photographs macros. Photos of tom ... ..
Translator
Auspicidores
